A Complete Range Of Metal Cleaning
And Surface Treatment Solutions

Telephone: +44 (0) 20 8281 6370
contact
 
 
  • ProSolv
  • Replace Trike
  • ProSolv
  • Replace Trichloroethylene
ProSolv1 Replace Trichloroethylene2 ProSolv2 Replace Trichloroethylene2

High Performance Critical Cleaning Solvent

Replace Trichloroethylene

Vapour degreasing: How to replace Trichloroethylene

Condensation Cleaning
.
Vapour degreasing is the simplest but most effective degreasing and critical cleaning process.
It has, until recently, been subject to little change since it was first invented in the early part of the 20th century.

.
See Our Demonstration Video.

Trichloroethylene will be unobtainable for metal cleaning or other uses without authorisation after April 2016

ProSolv® a proprietary tertiary azeotropic formulation based on a fluorinated solvent has been developed as a direct "drop In" replacement for trichloroethylene and other chlorinated solvents.

ProSolv® is extremely stable and simple to use meeting all the increasingly stringent legislative demands for safer, non flammable solvents with a low environmental impact in the precision engineering industries.

.
Read More About The Sunset Date For Trichloroethylene.

Quality Management

ProSolv® offers high performance cleaning at a lower cost than other fluorinated solvent cleaners

ProSolv® can be used in most existing vapour degreasing equipment and can be used safely for immersion cleaning using ultrasonics, where it has been optimised with a high specific gravity and very low surface tension.

Unlike other chlorinated solvents ProSolv® can be used for manual cleaning in a suitably ventilated area. Typical applications are where high performance critical cleaning is required at lower cost than other fluorinated solvent cleaners. Vapour degreasing for medical, aerospace, optics, oxygen equipment service, high vacuum components and electronics.  

ProSolv® is an excellent choice to replace flammable solvents such as MEK, Acetone, Iso propyl alcohol (IPA) or hydrocarbons where manual wiping or brush cleaning is the preferred cleaning method.

ProSolv® is a stable azeotrope which can be recycled by distillation for reuse through many cycles. It is a very stable mixture  with no need for monitoring or the need for additives or stabilisers.

ProSolv® offers a cost effective replacement in formulations for dip, spray or aerosol applications and as a fast drying carrier solvent for oil, silicones and other lubricants.

.
See Technical Information.

EnviroTech Europe is accredited to ISO 9001:2008 for marketing and distribution of specialist cleaning chemicals and corrosion protection products.

ENVIRO Tech Europe is accredited to ISO 9001:2008

Envirotech Europe News
    Product Benefits
    • EFFICIENT AND ECONOMICAL
  • Non Flammable (No Flash Point)
  • High Solvency (KB Value 91)
  • Low Surface Tension
  • Low Boiling Point
  • Highly productive and economical in use
  • Stable in use no additives required
  • Minimal Non Volatile Residue
  • No Hazardous Air Pollutants (HAPs)
  • Compatible with metals and most plastics
  • Stable in use no additives required
    • APPROVED
  • SNAP Approved for Degreasing
  • Zero Ozone Depletion Potential (ODP)
  • Low Global Warming Potential (GWP)
  • Non Hazardous for transportation
  • Acid Acceptance Testing not needed
  • Excellent performance with ultrasonics
    • RELIABLE
  • Excellent customer service, technical support and training from qualified distributors throughout Europe


ProSolv®

Cost Effective Precision Cleaning Solvent

ENVIROTech Europe Ltd
100a High Street
Hampton
Middlesex
United Kingdom
TW12 2ST

Company registered in UK No 4170693
VAT No GB765 682 977
© Copyright 2014 ALL RIGHTS RESERVED

Follow EnviroTech:
TERMS AND CONDITIONSCOOKIE POLICYSITE MAP


Telephone: +44 (0) 20 8281 6370
Website: www.critical-cleaning.com